Product Center
Contact Us
Tel：0086-519-83561818
Fax：0086-519-83561818
Address：Building 01, No. 258-19 Jinhua Road, Wujin Economic Development Zone, Changzhou City, Jiangsu Province
Website：www.czgaoma.com
Website：www.jsgaoma.com
Head Protection Products
●Material: The shell is made of high-impact ABS material.
●Features: The top of the cap is H" shaped, with slots on both sides for wearing a protective mask or other sound-proof equipment, etc.; the cap lining is a 6-point fabric inner village, which can be adjusted by rotation and can be adjusted by snap buttons.
●Material: The shell is made of ABS engineering plastics for safety helmets.
●Features: The hat shape is novel and elegant, and the top is designed as louver-style vents on both sides, which can speed up the heat removal; there are slots on both sides, which can wear protective masks and sound insulation, etc.; the hat lining is 6-point fabric lining, knob type Adjustment, optional snap-button adjustment configuration.
●Compliance with standards: Meet GB2811-2019, CE EN397: 2012, ANSI Type 1 Class C standards.
●Surface treatment: Logo can be printed on the surface of the cap shell, reflective strips, film, and water transfer printing can be done.
●Material: The shell is made of FRP.
●Features: both the front and the back are sprayed with environmentally friendly paint, the inkstone is beautiful, and the steel is good; the cap shape is designed as a small round top; it has high temperature resistance, cold resistance and other properties; the cap lining is a 4-point fabric lining, knob type Adjustment, optional snap-button adjustment configuration.
●Compliance with standards: Meet GB2811-2019, CE EN397: 2012 standards.
●Surface treatment: Logo can be printed on the surface of the cap shell, reflective strips, film, and water transfer printing can be done.
●Material: The shell is made of high-impact ABS material.
●Features: The top of the cap is H" shaped, and vent holes are designed on both sides and the back to facilitate the heat dissipation of the head and accelerate the discharge of hot air in the cap; there are slots on both sides for wearing protective masks or other sound insulation equipment, etc.; The cap lining is a 6-point fabric inner village, which can be adjusted with a knob, and can be adjusted with a button.
●Compliance with standards: Meet GB2811-2019, CE EN397: 2012, ANSI Type 1 Class C standards.
● Surface treatment: Logo can be printed on the surface of the cap shell, reflective strips, film, and water transfer printing can be done. "
Official Account
Website Mobile
Jiangsu Gaoma Safety Equipment Co., Ltd.
Tel：0086-519-83561818
Fax：0086-519-83561818
Address：Building 01, No. 258-19 Jinhua Road, Wujin Economic Development Zone, Changzhou City, Jiangsu Province
Website：www.czgaoma.com
Website：www.jsgaoma.com
